1. Home /
  2. Inert LabWare /
  3. Filtration

Filtration

Savillex filter assemblies and components are manufactured from PFA for the widest chemical compatibility and lowest metal contamination, and are used in a wide range of applications, for both liquids and gases.
Pre-assembled PFA filtration units are available in several common configurations for in-line filtration of liquids or gases as single stage or multiple stage assemblies.
Moulded PFA filter components enable the creation of chemically inert, custom filter assemblies in a variety of sizes and configurations. A filter assembly is comprised of an inlet, filter grid, clamp and outlet. Filter membranes are available for all assembly sizes and can be changed without disconnecting external lines.

Alphabetical Alphabetical Reversed Latest Popularity
47 mm single stage filter assembly, 1/4in x 1/4in, PFA clamp

47 mm single stage filter assembly, 1/4in x 1/4in, PFA clamp

Code: QX107477
All wetted components are molded PFA Filter membranes can be replaced without disconnecting lines PFA clamp nut for higher temperature applications Recommend wrench set f...
Grid, 47/50 mm filter

Grid, 47/50 mm filter

Code: QX107572
Molded of PFA Service temperature to 500 °F (260 °C) Grids snap into support ring or outlet to hold filter membrane For use with 47 or 50 mm filter components
9 mm filter membrane, 1-2 micron

9 mm filter membrane, 1-2 micron

Code: QX107645
Made of PTFE Service temperature to 500 °F (260 °C) Chemically and biologically inert Ten membranes per package
50 mm filter membrane, 5-6 micron (pk/50)

50 mm filter membrane, 5-6 micron (pk/50)

Code: QX107665
Made of PTFE Service temperature to 500 °F (260 °C) Chemically and biologically inert 50 membranes per pack
Clamp, 47 mm filter single-stage filter, PFA, orange

Clamp, 47 mm filter single-stage filter, PFA, orange

Code: QX107559
Extended length for multiple stage filtration Clamp assembly molded of PFA Service temperature to 500°F (260°C) Orange colour For use with 47 mm filter component...
50 mm Single Stage Filter Assembly, 1/2in x 1in x 1/2in x 1in, PFA clamp

50 mm Single Stage Filter Assembly, 1/2in x 1in x 1/2in x 1in, PFA clamp

Code: QX107482
Service temperature range of PFA is -328°F to 500°F (-200°C to 260°C) All wetted components are molded PFA Filter membranes can be replaced without disconn...
25 mm filter membrane, 5-6 micron (pk/50)

25 mm filter membrane, 5-6 micron (pk/50)

Code: QX107653
Made of PTFE Service temperature to 500 °F (260 °C) Chemically and biologically inert 50 membranes per pack
Inlet, 47 mm filter, 3-1/2in open x 1in tube

Inlet, 47 mm filter, 3-1/2in open x 1in tube

Code: QX107516
Molded of PFA Service temperature to 500 °F (260 °C) For use with 47 mm filter components
25 mm single stage filter assembly, 1/4in x 1/4in

25 mm single stage filter assembly, 1/4in x 1/4in

Code: QX107476
All wetted components are molded PFA Filter membranes can be replaced without disconnecting lines Hand tighten, no wrench required Ferrule nut connections for ¼&rd...
Outlet, 47 mm filter, ferrule nut for 3/8in tubing

Outlet, 47 mm filter, ferrule nut for 3/8in tubing

Code: QX107545
Molded of PFA Service temperature to 500 °F (260 °C) For use with 47 mm filter components
25 mm filter membrane, 0.2 micron (pk/50)

25 mm filter membrane, 0.2 micron (pk/50)

Code: QX107650
Made of PTFE Service temperature to 500 °F (260 °C) Chemically and biologically inert 50 membranes per pack
13 mm filter membrane, 0.45 micron (pk/50)

13 mm filter membrane, 0.45 micron (pk/50)

Code: QX107647
Made of PTFE Service temperature to 500 °F (260 °C) Chemically and biologically inert 50 membranes per pack