Caps & Vials for PFAS Analysis

Because Per- and Polyfluoroalkyl substances don't break down they can accumulate over time in the environment and in the human body. There is increasing evidence that exposure to PFAS can adversely affect human health. As a result, regulatory bodies are increasingly legislating that many materials should be tested to ensure that they contain no traces of PFAS or that the traces are below allowed legal limits.


Because PFAS are widely used in materials, such as PTFE, commonly used in chemical analysis consumables, laboratories are in need of new labware products to minimize background contamination from these chemicals.
 

When you are unable to use PTFE as a liner – our new polyimide/silicone lined closure is the perfect alternative.  This new closure has a useable temperature range up to 130°C., while the liner performs well up to ten injections.
The polyimide is amber translucent and the white silicone rubber is a high purity rubber composition resulting in low leachables.
 

Use with our polypropylene vials, designed to work in most autosamplers.  These lightweight vials are an economical alternative to glass.  Manufactured from chemical resistant polypropylene, they are ideal for sampling, testing, storing and transporting.
 

V0726    9mm Cap, Royal Blue, Polyimide/Silicone

V1195    100µl Polypropylene Limited Volume Vial, 12x32mm, 9mm Thread

V1196    500µl Polypropylene Limited Volume Vial, 12x32mm, 9mm Thread

V1865    700µl Polypropylene Limited Volume Vial, 12x32mm, 9mm Thread

V1174    1.5ml Polypropylene Limited Volume Vial, 12x32mm, 9mm Thread